650 Sheet Membrane

650 Sheet Membrane is a strong, pliable, 60-mil, post-concrete pour self-adhesive waterproofing membrane/vapor retarder that virtually eliminates water and vapor transmission through concrete slabs.  650 Sheet Membrane is designed for use on foundation walls, mud slabs, sills and spandrel beams, tunnels, plaza decks, parking garages, and related applications where waterproofing is critical. It may also be used on wood or concrete block structures and insulated concrete forms (ICF).

650 Sheet Membrane is available in the following sizes: 36″ x 66.7′ and 48″ x 50′ rolls.

FEATURES & BENEFITS

  • Wide membrane allows for fast and easy application to continuous flat surfaces
  • Narrow width material is available for trim corners, construction joints and other applications
  • Cold applied and self-adhered to poured concrete over liquid adhesive
  • Factory bonding assures uniform membrane thickness of 60 mils
  • Formulated for low temperature applications down to 25°F (-4°C)
  • Wound on a disposable treated release sheet to prevent blocking in the rolls
  • The 650 membrane can be utilized in the Dual Core System that capitalizes on both the advantages of a fluid-applied and sheet-applied membrane in a single system

Photo Gallery

Companion Products

(where applicable)
105 Flashing 105-mil, strong, pliable self-adhesive sheet flashing.
650 LT Liquid Adhesive Used to prime all structural concrete, masonry, or wood surfaces prior to membrane installation.
650 WB Liquid Adhesive Used to prime all structural concrete, masonry, or wood surfaces on which Polyguard Membranes will be applied.
Balconyguard™ Outside Corner Boot 60-mil combination of rubberized asphalt and polyethylene for corner detailing.
Commercial Stretch Fluid-applied, single-component thermoplastic rubber coating.
Detail Sealant PW™ VOC/HAPS-free high performance solvent-free sealant.
Detail Tape Use as detail strips on corners, penetrations, joints, and for patching damaged areas of the membrane.
Green Concrete Liquid Adhesive Used to prime green concrete less than seven day cure for normal structural concrete
LM-85 SSL Self leveling flood coat waterproofing membrane.
LM-95 Two-component fast cure urethane waterproofing membrane.
Polyflow® BD Sheet molded drain for balcony decks with less than 3″ of concrete and foot traffic only.
Polyflow® 15 / 15P Sheet molded drain for vertical application with a compressive strength of 15,000 psf.
Polyflow® 18 Sheet molded drain for horizontal application with a compressive strength of 21,000 psf.
Totalflow™ A sheet molded high-capacity perimeter drain.

Product Resources

FileAction
Data Sheet (PDF)Download
Dual Core System Data Sheet (PDF)Download
Guide Spec (PDF)Download
Guide Spec (WORD)Download
Dual Core System Guide Spec w/ Commercial Stretch (PDF)Download
Dual Core System Guide Spec w/ Commercial Stretch (WORD)Download
Dual Core System Guide Spec w/ LM-85 SSL (PDF)Download
Dual Core System Guide Spec w/ LM-85 SSL (WORD)Download
HPD (PDF)Download
Materials List (PDF)Download
Features & Benefits (PDF)Download
SDS (PDF)Download

Standard Details (PDF)

Corners

FileAction
PGArch Detail WP13 650 Membrane Field Form Self-Adhered Outside Corner 01172022Download

Joints

FileAction
PGArch Detail WP6 650 Membrane Horizontal Expansion Joint Cover 01172020Download
PGArch Detail WP11 650 Membrane Wall Expansion Joint Cover 01172022Download

Penetrations

FileAction
PGArch Detail WP4 650 Membrane Horizontal Penetration Waterproofing 01172022Download
PGArch Detail WP8 650 Membrane Dual Level Drain 01172022Download
PGArch Detail WP14 650 Membrane Vertical Wall Penetration Waterproofing 01172022Download

Repairs / Patches

FileAction
PGArch Detail WP1 650 Membrane Self-Adhered Repair Patch 01172022Download

Terminations

FileAction
PGArch Detail WP7 650 Membrane Horizontal Slab At Wall Termination 01172022Download
PGArch Detail WP15 650 Membrane Top Of Wall Termination Options 01172022Download

Transitions

FileAction
PGArch Detail WP12 650 Membrane Hot Applied Rubber Tie-In To Self-Adhered Wall Membrane 01172022Download

Walls

FileAction
PGArch Detail WP2 650 Membrane Poured Concrete Or CMU Planter Waterproofing 01172022Download
PGArch Detail WP3 650 Membrane Vertical Wall Application 01172022Download
PGArch Detail WP5 650 Membrane Tunnel Waterproofing Detail 01172022Download
PGArch Detail WP9 650 Membrane Footer Waterproofing Top Of Interior Floor 12 inches And Under From Top Of Footer 01172022Download
PGArch Detail WP10 650 Membrane Footer Waterproofing Top Of Interior Floor Is Greater Than 12 inches Above Top Of Footer 01172022Download

Standard Details (DWG)

To obtain a DWG detail, you must:
Right click on button & select

Corners

FileAction
PGArch Detail WP13 650 Membrane Field Form Self-Adhered Outside Corner 01172022Download

Joints

FileAction
PGArch Detail WP6 650 Membrane Horizontal Expansion Joint Cover 01172020Download
PGArch Detail WP11 650 Membrane Wall Expansion Joint Cover 01172022Download

Penetrations

FileAction
PGArch Detail WP4 650 Membrane Horizontal Penetration Waterproofing 01172022Download
PGArch Detail WP8 650 Membrane Dual Level Drain 01172022Download
PGArch Detail WP14 650 Membrane Vertical Wall Penetration Waterproofing 01172022Download

Repairs / Patches

FileAction
PGArch Detail WP1 650 Membrane Self-Adhered Repair Patch 01172022Download

Terminations

FileAction
PGArch Detail WP7 650 Membrane Horizontal Slab At Wall Termination 01172022Download
PGArch Detail WP15 650 Membrane Top Of Wall Termination Options 01172022Download

Transitions

FileAction
PGArch Detail WP12 650 Membrane Hot Applied Rubber Tie-In To Self-Adhered Wall Membrane 01172022Download

Walls

FileAction
PGArch Detail WP2 650 Membrane Poured Concrete Or CMU Planter Waterproofing 01172022Download
PGArch Detail WP3 650 Membrane Vertical Wall Application 01172022Download
PGArch Detail WP5 650 Membrane Tunnel Waterproofing Detail 01172022Download
PGArch Detail WP9 650 Membrane Footer Waterproofing Top Of Interior Floor 12 inches And Under From Top Of Footer 01172022Download
PGArch Detail WP10 650 Membrane Footer Waterproofing Top Of Interior Floor Is Greater Than 12 inches Above Top Of Footer 01172022Download

Product Submittals

For a job-specific submittal package, please contact Polyguard for Product Submittal Requests. Click here to find your area’s field representative.