Commercial Stretch

U.S. Patent No. 6025032
U.S. Patent No. 6632882
U.S. Patent No. 6230452

Theromplastic Technology is behind the success of our signature waterproofing, Commercial Stretch. This patented single component, cold liquid-applied, elastomeric, coating cures to form a durable waterproofing membrane capable of bridging substrate shrinkage cracks up to 1/16-inch. Commercial Stretch is designed for below grade exterior waterproofing of concrete, precast concrete, CMU foundations and other structural surfaces on the hydro-positive side. Where redundant protection is desired, a hydro positive-side application coupled with a hydro negative-side application of PRO 1000 is suggested.

For Contractors/Installers, our product can be used in the coldest of climates and conditions allowing design flexibility and cost savings of not having to tent the project. In addition with quick and easy prep, easy spray application and easy clean up you save hours and dollars.

This product is not available in the following states: Maryland, Delaware, Rhode Island, Connecticut,  and California.

FEATURES & BENEFITS

  • Single component product requires no mixing ensuring uniformity and quality while reducing waste and labor
  • Can be applied in temperatures as cold as -20°F, which can help avoid tenting and heating in cold climates
  • Unrivaled UV protection aids in timeline flexibility
  • Quick prep, easy to spray application, & easy to clean up… lowers square foot costs and saves hours
  • Wet product can be applied to dry product for membrane repair, creating a continuous system with no seam or possible breach created
  • Contains thermoplastic technology to create a mold resistant barrier that micro-organisms cannot penetrate
  • The average daily SF installation is 6,000 to 8,000 SF eliminating down time between trades
  • Available in Low VOC options

Photo Gallery

Companion Products

(where applicable)
650 Sheet Membrane 60-mil, post-concrete pour waterproofing membrane/vapor retarder.
Detail Sealant PW™ VOC/HAPS free high performance solvent-free sealant.
Polyflow® 15/15P Sheet molded drain for vertical application with a compressive strength of 15,000 psf.
Totalflow™ A sheet molded high-capacity perimeter drain.
Underseal® PRM™ 65-mil post applied membrane.

Product Resources

FileAction
Data Sheet (PDF)Download
Data Sheet – CA (PDF)Download
Dual Core System Data Sheet (PDF)Download
Guide Spec (PDF)Download
Guide Spec (WORD)Download
Dual Core System Guide Spec w/ Commercial Stretch (PDF)Download
Dual Core System Guide Spec w/ Commercial Stretch (WORD)Download
Materials List (PDF)Download
Features & Benefits (PDF)Download
SDS – 100 VOC (PDF)Download
SDS – 200 VOC (PDF)Download
SDS – 525 VOC (PDF)Download

Penetrations

FileAction
PGArch Detail CS6 Commercial Stretch Penetration Detail 02112022.pdfDownload

Transitions

FileAction
PGArch Detail CS3 Commercial Stretch TieIn To Underslab Membrane 02112022.pdfDownload

Walls

FileAction
PGArch Detail CS1 Commercial Stretch Wall Foundation Detail 02112022.pdfDownload
PGArch Detail CS2 Commercial Stretch Footer Detail 02112022.pdfDownload
PGArch Detail CS4 Commercial Stretch Substrate Detail 02112022.pdfDownload
PGArch Detail CS5 Commercial Stretch Corner Detail 02112022.pdfDownload

To obtain a DWG detail, you must:
Right click on button & select

Penetrations

FileAction
PGArch Detail CS6 Commercial Stretch Penetration Detail 02112022.dwgDownload

Transitions

FileAction
PGArch Detail CS3 Commercial Stretch TieIn To Underslab Membrane 02112022.dwgDownload

Walls

FileAction
PGArch Detail CS1 Commercial Stretch Wall Foundation Detail 02112022.dwgDownload
PGArch Detail CS2 Commercial Stretch Footer Detail 02112022.dwgDownload
PGArch Detail CS4 Commercial Stretch Substrate Detail 02112022.dwgDownload
PGArch Detail CS5 Commercial Stretch Corner Detail 02112022.dwgDownload

Product Submittals

For a job-specific submittal package, please contact Polyguard for Product Submittal Requests. Click here to find your area’s field representative.