Underseal® CRM™

Underseal® CRM™ - Chemical Resistant Membrane - is a strong, 85-mil, robust pre-applied membrane that has been designed and tested to withstand elevated concentrations of soil, water and vapor contaminants. When installed below the slab and behind vertical walls, Underseal® CRM™ creates a barrier preventing water & vapor from transmitting into the structure.

Underseal® CRM™ provides a continuous seal underneath the concrete slab and behind vertical “blindside” cast in place concrete walls. A strong mechanical bond is developed between the membrane and concrete at the time of pouring as the concrete intermingles with the fibers of the nonwoven geotextile fabric. Underseal® CRM™ is typically installed horizontally over a prepared subbase such as compacted soil, mud slab or #57 stone. It can also be used in vertical applications.
thumbnail preview

Features & Benefits

Lasting Durability: Tough 3-layer composite membrane - Technology that has stood the test of time.
Outstanding Puncture Resistance: 2 times higher than the new AC 527 requirement - Better protection against backfill damage.
Strong Mechanical Bond: Our inner fiberous layer embeds itself into the cured concrete creating a very strong mechanical bond - ensures our waterproofing system will stay in place as the building and outside soil moves during the building's lifetime.
Resistant to Water Migration: An adhesive bond is created when heat from the concrete slab while curing , causes our compound to melt onto the concrete's positive side surface creating a continuous sealed structure.
Jobsite Adaptability: Flexible material that adapts to job site irregularities for ease of installation.
Superior Joints: Strong laps seams create a long lasting, water tight system - Outperforms the new AC 527 standard (ASTM 1876) by more than 150%.
Crack Protection: Underslab is thicker than most competitive products giving it stress-absorbing and elongation properties that maintain a watertight seal if cracks develop in the base material or the slab.
Helps Manage Harmful Gases : Acts as a barrier against toxic contaminants methane and radon gas, which may attempt to enter the structure through cracks in the concrete.

Product Resources

Resource Icon
Underseal CRM - Data Sheet
Resource Icon
Underseal CRM - Guide Spec
Resource Icon
Underseal CRM - Product Information Sheet
Resource Icon
Underseal CRM - Materials Checklist
Resource Icon
Underseal CRM - SDS

Product Details

Underseal CRM - Detail Set (CRH1-21)
Underseal CRM - Detail - Horizontal To Vertical Tie In (CRH1)
Underseal CRM - Detail - Isometric End Lap (CRH2)
Underseal CRM - Detail - Pile Termination Profile 1 (CRH3)
Underseal CRM - Detail - Pile Termination Profile 2 (CRH4)
Underseal CRM - Detail - Termination To Existing Concrete Wall (CRH5)
Underseal CRM - Detail - Saw Cut Through Existing Slab (CRH6)
Underseal CRM - Detail - Ultra CRM Tie In To Post Terminated CRM Profile 1 (CRH7)
Underseal CRM - Detail - Ultra CRM Tie In To Embedded CRM Membrane Profile 2 (CRH8)
Underseal CRM - Detail - Isometric Overview Sump Elevator Pit (CRH9)
Underseal CRM - Detail - CR Inside Corner Boot Detail (CRH10)
Underseal CRM - Detail - CRM Membrane Side Laps Selvedge (CRH11)
Underseal CRM - Detail - Carton Forms Detail (CRH12)
Underseal CRM - Detail - Ultra CRM Tie In To Embedded CRM Membrane With Polyflow 15 (CRH13)
Underseal CRM - Detail - CRM Membrane Penetration Profile and 2 (CRH14)
Underseal CRM - Detail - Horizontal CRM Membrane Pitch Pocket (CRH15)
Underseal CRM - Detail - CR Outside Corner Boot At Corner Or Column (CRH16)
Underseal CRM - Detail - Pre Applied Seal Of A Vertical Leg Turned Up From CRM Membrane End Lap (CRH17)
Underseal CRM - Detail - CRM Membrane Repair Patch Less Than 2 Inches (CRH18)
Underseal CRM - Detail - CRM Membrane Repair Patch Greater Than 2 Inches (CRH19)
Underseal CRM - Detail - CRM Membrane Pit Sidewall Transition At Top Of Wall (CRH20)
Underseal CRM - Detail - Field Made Outside Corner Boot Detail (CRH21)
Underseal CRM - Detail Set (CRV1-16)
PDF
Underseal CRM - Detail - Earth Retention System (CRV1)
Underseal CRM - Detail - 4 Inch Selvedge Lap Seam (CRV2)
Underseal CRM - Detail - Embedded CRM Membrane Tie In To Ultra CRM Membrane (CRV3)
Underseal CRM - Detail - Penetration Rough Fit Around Penetration Sidewall (CRV4)
Underseal CRM - Detail - Soil Nail Stud Plate Condition (CRV5)
Underseal CRM - Detail - Vertical CRM Membrane Reinforced Seam (CRV6)
Underseal CRM - Detail - CRM Membrane End Lap In Center Of Lift (CRV7)
Underseal CRM - Detail - CRM MembraneTemporary End Lap Securement At Top Of Lift (CRV8)
Underseal CRM - Detail - Repair Patch Less Than 2 Inches (CRV9)
Underseal CRM - Detail - Repair Patch Greater Than 2 Inches (CRV10)
Underseal CRM - Detail - CRM Membrane Tie In To CRM Membrane (CRV11)
Underseal CRM - Detail - CRM Membrane Tie In To Ultra CRM Membrane (CRV12)
Underseal CRM - Detail - Vertical Termination Ultra CRM to CRM Membrane (CRV13)
Underseal CRM - Detail - CRM Membrane Tie In To Ultra CRM Membrane At Outside Corner (CRV14)
Underseal CRM - Detail - Top Of Wall Embedded Termination (CRV15)
Underseal CRM - Detail - Top Of Wall Termination Mechanically Fastened (CRV16)