Underseal® Pit Top Corner Boot

The Underseal® Pit Top Corner Boot is a 60-mil combination of rubberized asphalt bonded to polyethylene.  The adhesive surface is covered with a release liner which will be removed prior to application of the Underslab Membrane.  Apply the Underseal® Pit Top Corner Boot in the corner to reinforce and seal the Underseal® Underslab Membrane.  This preformed corner boot conforms to the film side of the Underseal® Underslab Membrane to seal any possible pinhole conditions.

Boots are 6″x 6″x 6″ and come 25 to a carton.

FEATURES & BENEFITS

  • Apply in the corner to reinforce and seal the Underseal® Underslab Membrane
  • Conforms to the film side of the Underseal® Underslab Membrane to seal any potential pinhole conditions
  • Release liner for ease of installation
  • Saves Time & Labor on the job site

Companion Products

(Where Applicable)
Underseal® Blindside™ Membrane 73-mil, pre-concrete pour waterproofing membrane used for vertical positive side waterproofing.
Underseal® Underslab Membrane 85-mil pre-concrete pour waterproofing membrane/vapor barrier that provides a continuous seal.

Product Resources

FileAction
PGArch-PDS-US_PitTopCornerBoot-02172022.pdfDownload
HPD (PDF)Download
SDS (PDF)Download

Product Submittals

For a job-specific submittal package, please contact Polyguard for Product Submittal Requests. Click here to find your area’s field representative.