650 LT Liquid Adhesive

650 LT Liquid Adhesive is a rubber-based adhesive in solvent solution which is specifically formulated to provide excellent adhesion with the Polyguard® waterproofing membranes under many kinds of surface conditions. It is designed for use as a primer for all structural concrete, masonry, or wood surfaces on which waterproofing membranes will be applied, and can be installed on applications down to 25°F (-4°C).

  • Used to prime all structural concrete, masonry, or wood surfaces on which Polyguard® waterproofing membranes will be installed.
  • Designed to be used on applications down to 25°F (-4°C).
  • May be used on horizontal surfaces, but remains tacky, and precautions must be used in this application.
  • Must be used on all concrete block and brick wall conditions.

650 WB Liquid Adhesive

650 WB Liquid Adhesive is a water-based, rubber-based, low-tack adhesive which is specifically formulated to provide excellent adhesion. It has a VOC content of 5 g/L. 650 WB Liquid Adhesive will be orange color in appearance. It is designed to be used in ambient temperatures and surface temperatures of 40°F (5°C) and rising. It is an integral part of Polyguard Systems which is used on dry surfaces to condition them to be dust free, so the substrate is suitable for the application of Polyguard Waterproofing Membranes.

  • Used to prime all structural concrete, masonry, or wood surfaces on which Polyguard Membranes will be applied.
  • Designed to be used in ambient temperatures and surface temperatures of 40°F (5°C) and rising.
  • Used on all concrete block and brick wall conditions.
  • Used on both vertical and horizontal surfaces.

California Sealant

California Sealant is used to promote sealing laps and areas of penetration of the Underseal® Underslab and Underseal® Blindside where geotextile fabric will be joined by Polyguard sealants to the adjoining membrane and surrounding substrates. The function of the sealant is to seal all porous portions of the geotextile surface and promote adhesion of Polyguard sealants such as LM-85 SSL, LM-95, Detail Sealant PW™ and Underseal® Fabric Tape. The VOC content meets the South Coast Air Quality Management District regulations established under the February 1, 1991 version of Rule 1168 © (2) Adhesion and Sealant Applications.

  • Used to prime Underseal® systems components and all joining substrates such as structural concrete, masonry, or wood surfaces on which Polyguard sealants will be applied.
  • Designed to be used on applications down to temperatures of 25°F (-4°C)

Green Concrete Liquid Adhesive

Green Concrete Liquid Adhesive is a rubber-based adhesive in solvent solution which is specifically formulated to provide excellent adhesion with the Polyguard® waterproofing membranes under many kinds of surface conditions. It is designed to prime green concrete less than seven day cure for normal structural concrete.

  • Used to prime green concrete less than seven day cure for normal structural concrete
  • Designed to be used on applications of temperatures down to 25°F (-4°C)
  • Roller or Brush applied
  • Available in 5 gallon pails

Quick Grip Adhesive

Quick Grip Adhesive is an industrial-grade aerosolized adhesive in a portable spray system, formulated to adhere protection courses, drainage composites, insulations, air and vapor barrier membranes, waterproofing membranes, and through wall flashings to a variety of substrates. It contains no chlorinated solvents and offers an excellent alternative to methylene chloride-based products. Quick Grip Adhesive provides a fast and economical solution to most building envelope component adhesive requirements.

  • Quick dry time
  • Extended working time
  • Excellent adhesion to a wide variety of substrates
  • Aggressive grab tack
  • Can be used as a primer or adhesive
  • No cleanup or maintenance
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.

Start typing and press Enter to search