Airlok Flex® VP & VP LT

Air Barrier systems provide the only effective defense against air leakage and moisture issues. Polyguard’s Airlok Flex® VP is a water-based, permeable, cold fluid-applied, single-component, acrylic-based, elastomeric membrane designed to prevent air and moisture penetration while allowing water vapor to escape.  Airlok Flex® VP is engineered as an air barrier for installation on concrete and concrete masonry (CMU), paper, glass or foil faced sheathing, plywood, oriented strand board (OSB) and rigid insulation in the cavity.  Airlok Flex® VP can be applied in a temperature range of 40°F up to 120°F and is resistant to ultraviolet (UV) for up to one year.

MOISTURE & AIR STOP WITH US!

FEATURES & BENEFITS

  • Superior UV resistance allows for use on both unexposed and exposed portions of walls
  • Can be applied in a temperature range of 40°F up to 120°F
  • Forms a tough, continuous bonded elastomeric barrier that provides protection against air infiltration and exfiltration to reduce energy loss
  • Available in Low Temperature (LT) version with use in temperatures 20°F and rising

Photo Gallery

Companion Products

(where applicable)
650 LT
Liquid Adhesive		 Used to prime all structural concrete, masonry, or wood surfaces prior to membrane installation.
650 WB
Liquid Adhesive		 Used to prime all structural concrete, masonry, or wood surfaces on which Polyguard Membranes will be applied.
Airlok® Sheet
200 BU/NP		 28-mil butyl, self-adhesive, non-permeable sheet membrane. 60-day UV exposure with broad in-surface temperature up to 240°F.
Airlok® Sheet
UV 200 BU/NP		 28-mil butyl, non-permeable sheet membrane with a foil/polyscrim backing. 1-year UV exposure with broad in-surface temperature up to 240°F.
Airlok® Sheet
400 HT/NP		 40-mil modified asphalt, high temperature, self-adhesive, non-permeable sheet membrane. 60-day UV exposure.
Airlok® Sheet
400 NP		 40-mil modified asphalt, self-adhesive, non-permeable sheet membrane. 60-day UV exposure.
Airlok® Sheet
UV 400 NP		 40-mil modified asphalt, self-adhesive, non-permeable sheet membrane with foil/polyscrim film backing. 1-year UV exposure.
Airlok® Sheet
UV Ultra 400 NP		 40-mil modified asphalt, self-adhesive, non-permeable sheet membrane with durable foil facing backing. 2-year UV exposure.
Airlok® STPE
Detail-N-Joint		 Fluid-applied, fiber-filled joint filler. Detailing compound used at transitions in the building process. Compatible with most building materials.
Can be used on wet/damp surfaces.
Airlok® STPE
Flash-N-Roll		 Fluid-applied WRB (Rolled on) and Window flashing. Durable, compatible with most building materials, can be used on wet/damp surfaces.
Airlok® STPE
Gun-N-Spread		 Fluid-applied flashing material. Troweled on above grade Window/Door rough openings. Compatible with most building materials.
Can be used on wet/damp surfaces.
Detail Sealant PW™ VOC/HAPS-free high performance solvent-free sealant.
Quick Grip Adhesive Industrial-grade aerosolized adhesive in a portable spray system.

Product Resources

FileAction
Data Sheet - VP (PDF)Download 
Data Sheet - VP LT (PDF)Download 
Guide Spec (PDF)Download 
Guide Spec (WORD)Download 
Materials List (PDF)Download 
Features & Benefits (PDF)Download 
SDS - VP (PDF)Download 
SDS - VP LT (PDF)Download 

Standard Details (PDF)

Joints

FileAction
PGArch Detail AFFP09 Vapor Permeable Airlok Flex Series Substrate Joint 06192020Download 
PGArch Detail AFFP10 Vapor Permeable Airlok Flex Series Transition Joint 06192020Download 
PGArch Detail AFFP11 Vapor Permeable Airlok Flex Series Expansion Joint 06192020Download 
Penetrations

FileAction
PGArch Detail AFFP06A Vapor Permeable Airlok Flex Series Penetration 06192020Download 
PGArch Detail AFFP06B Vapor Permeable Airlok Flex Series Penetration Isometric 06192020Download 
Transitions

FileAction
PGArch Detail AFFP01 Vapor Permeable Airlok Flex Series Wall&Fndn 06192020Download 
PGArch Detail AFFP02 Vapor Permeable Airlok Flex Series Floor Transition 06192020Download 
Walls

FileAction
PGArch Detail AFFP07 Vapor Permeable Airlok Flex Series Corner 06192020Download 
PGArch Detail AFFP08 Vapor Permeable Airlok Flex Series Parapet 06192020Download 
Windows

FileAction
PGArch Detail AFFP03 Vapor Permeable Airlok Flex Series Window Header 06192020Download 
PGArch Detail AFFP04 Vapor Permeable Airlok Flex Series Window Jamb 06192020Download 
PGArch Detail AFFP05 Vapor Permeable Airlok Flex Series Window Sill 06192020Download 

Standard Details (DWG)

To obtain a DWG detail, you must:
Right click on button & select

Joints

FileAction
PGArch Detail AFFP09 Vapor Permeable Airlok Flex Series Substrate Joint 06192020Download 
PGArch Detail AFFP10 Vapor Permeable Airlok Flex Series Transition Joint 06192020Download 
PGArch Detail AFFP11 Vapor Permeable Airlok Flex Series Expansion Joint 06192020Download 
Penetrations

FileAction
PGArch Detail AFFP06A Vapor Permeable Airlok Flex Series Penetration 06192020Download 
PGArch Detail AFFP06B Vapor Permeable Airlok Flex Series Penetration Isometric 06192020Download 
Transitions

FileAction
PGArch Detail AFFP01 Vapor Permeable Airlok Flex Series Wall&Fndn 06192020Download 
PGArch Detail AFFP02 Vapor Permeable Airlok Flex Series Floor Transition 06192020Download 
Walls

FileAction
PGArch Detail AFFP07 Vapor Permeable Airlok Flex Series Corner 06192020Download 
PGArch Detail AFFP08 Vapor Permeable Airlok Flex Series Parapet 06192020Download 
Windows

FileAction
PGArch Detail AFFP03 Vapor Permeable Airlok Flex Series Window Header 06192020Download 
PGArch Detail AFFP04 Vapor Permeable Airlok Flex Series Window Jamb 06192020Download 
PGArch Detail AFFP05 Vapor Permeable Airlok Flex Series Window Sill 06192020Download 

Product Submittals

For a job-specific submittal package, please contact Polyguard for Product Submittal Requests. Click here to find your area’s field representative.