Airlok® STPE Flash-N-Roll

Airlok® Flash-N-Roll is a single-component, cold-fluid-applied, Silyl Terminated Polyether (STPE) fluid-applied air barrier and/or flashing material; that combines the best of silicone and polyurethane properties.  Typically used as a fluid-applied, rolled on above grade rough opening flashingused prior to the installation of doors and windows.

MOISTURE & AIR STOP WITH US!

FEATURES & BENEFITS

  • Unique roller application as window opening flashing
  • Can be used on damp or wet surfaces
  • Unlike silicone products, Airlok STPE Flash-N-Roll is compatible with virtually all common Building Materials
  • Versatile roll on flashing or roll on membrane application from one product
  • Single-component; ease of application with no need for mixing
  • Wide range of application temperatures from 25°F (-3°C) up to 110°F (44°C)
  • Resistant to wash-off during rain events, extending the application time relative to inclement weather
  • High solids content of 100% for high yield and <23 g/l VOC
  • Compatible with most known building materials
  • Long term exposure to the sun’s ultra violet (UV) rays for a period of up to nine (9) months
  • Long term physical durability and chemical stability as a liquid applied air barrier system
  • Compliant with NFPA 285 in most wall assemblies

Photo Gallery

Product Resources

FileAction
Data Sheet (PDF)Download 
Guide Spec (PDF)Download 
Guide Specs (WORD)Download 
Features & Benefits (PDF)Download 
Installation Guidelines (PDF)Download 
SDS (PDF)Download 

Standard Details (PDF)

Joints

FileAction
PGArch Detail STPE09 Airlok STPE Substrate Joint 06192020Download 
PGArch Detail STPE10 Airlok STPE Transition Joint 06192020Download 
PGArch Detail STPE11 Airlok STPE Expansion Joint 06192020Download 

Penetrations

FileAction
PGArch Detail STPE06a Airlok STPE Penetration 06192020Download 
PGArch Detail STPE06b Airlok STPE Penetration Isometric 06192020Download 

Transitions

FileAction
PGArch Detail STPE01 Airlok STPE Wall&Fndn 06192020Download 
PGArch Detail STPE02 Airlok STPE Floor Transition 06192020Download 

Walls

FileAction
PGArch Detail STPE07 Airlok STPE Corner 06192020Download 
PGArch Detail STPE08 Airlok STPE Parapet 06192020Download 

Windows

FileAction
PGArch Detail STPE03 Airlok STPE Window Header 06192020Download 
PGArch Detail STPE04 Airlok STPE Window Jamb 06192020Download 
PGArch Detail STPE05 Airlok STPE Window Sill 06192020Download 

Standard Details (DWG)

To obtain a DWG detail, you must:
Right click on button & select

Joints

FileAction
PGArch Detail STPE09 Airlok STPE Substrate joint 06192020Download 
PGArch Detail STPE10 Airlok STPE Transition joint 06192020Download 
PGArch Detail STPE11 Airlok STPE Expansion Joint 06192020Download 

Penetrations

FileAction
PGArch Detail STPE06a Airlok STPE Penetration 06192020Download 
PGArch Detail STPE06b Airlok STPE Penetration Isometric 06192020Download 

Transitions

FileAction
PGArch Detail STPE01 Airlok STPE Wall&Fndn 06192020Download 
PGArch Detail STPE02 Airlok STPE Floor Transition 06192020Download 

Walls

FileAction
PGArch Detail STPE07 Airlok STPE Corner 06192020Download 
PGArch Detail STPE08 Airlok STPE Parapet 06192020Download 

Windows

FileAction
PGArch Detail STPE03 Airlok STPE Window Header 06192020Download 
PGArch Detail STPE04 Airlok STPE Window Jamb 06192020Download 
PGArch Detail STPE05 Airlok STPE Window Sill 06192020Download 

Product Submittals

For a job-specific submittal package, please contact Polyguard for Product Submittal Requests. Click here to find your area’s field representative.

Companion Products

(where applicable)
Airlok Flex® Impermeable air barrier for use on concrete and concrete masonry surfaces.
Airlok Flex® VP Permeable, single-component elastomeric air barrier membrane. Also available in Low Temperature version (VP LT).
Airlok Flex® WG Permeable, above-grade air, weather and vapor coating. Also available in Low Temperature version (WG LT).
Airlok® Sheet 200 BU/NP 20-mil butyl, self-adhesive, non-permeable sheet membrane. 60-day UV exposure with broad in-surface temperature up to 240°F.
Airlok® Sheet UV 200 BU/NP 20-mil butyl, non-permeable sheet membrane with a foil/polyscrim backing. 1-year UV exposure with broad in-surface temperature up to 240°F.
Airlok® Sheet 400 HT/NP 40-mil modified asphalt, high temperature, self-adhesive, non-permeable sheet membrane. 60-day UV exposure.
Airlok® Sheet 400 NP 40-mil modified asphalt, self-adhesive, non-permeable sheet membrane. 60-day UV exposure.
Airlok® Sheet UV 400 NP  40-mil modified asphalt, self-adhesive, non-permeable sheet membrane with foil/polyscrim film backing. 1-year UV exposure.
Airlok® Sheet UV Ultra 400 NP 40-mil modified asphalt, self-adhesive, non-permeable sheet membrane with durable foil facing backing. 2-year UV exposure.
Airlok® STPE Detail-N-Joint Fluid-applied, fiber-filled joint filler. Detailing compound used at transitions in the building process. Compatible with most building materials. Can be used on wet/damp surfaces.
Airlok® STPE Gun-N-Spread Fluid-applied flashing material. Troweled on above grade Window/Door rough openings. Compatible with most building materials.Can be used on wet/damp surfaces.
Airlok® STPE Spray-N-Roll Fluid-applied WRB (Spray or roll). Durable, compatible with most building materials, can be used on wet/damp surfaces.
Detail Sealant PW™ VOC/HAPS-free high-performance solvent-free sealant.