Polyguard logo
Innovation Based...Employee Owned...Expect More.

ARCHITECTURAL DETAILS

IBE Integrated Building Envelope logo
Home
Waterproofing
Air Barriers
Wall Systems
Drainage
Connections
Data Sheets | Details | Specifications | MSDS
 
UNDERSLAB
BLINDSIDE
SPLIT SLAB
PROTECTED WALL
650 WATERPROOFING
FLASHING
TILEGUARD
JOINT TAPE
 
UNDERSLAB WATERPROOFING DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
US1 - UNDERSLAB TIE IN TO BLINDSIDE MEMBRANE
US1
PDF:117KB
DWG:501KB
3-18-14
UNDERSLAB DETAILS
US2 - UNDERSLAB MEMBRANE END LAP SEAM
US2
PDF:96KB
DWG:493KB
3-18-14
US3 - UNDERSLAB MEMBRANE PILE TERMINATION 1
US3
PDF:108KB
DWG:502KB
3-18-14
US4 - UNDERSLAB MEMBRANE PILE TERMINATION 2
US4
PDF:107KB
DWG:497KB
3-18-14
US5 - UNDERSLAB TERMINATION-EXISTING WALL
US5
PDF:111KB
DWG:496KB
3-18-14
US6 - SAW CUT SLAB THROUGH UNDERSLAB
US6
PDF:155KB
DWG:499KB
3-18-14
US7 - TERMINATION OF UNDERSLAB TO FACE...
US7
PDF:112KB
DWG:496KB
3-18-14
US8 - 650 MEMBRANE TIE IN TO POST TERMINATED
US8
PDF:113KB
DWG:500KB
3-18-14
US9 - 650 OR PRM TIE IN TO EMBEDDED UNDERSLAB
US9
PDF:111KB
DWG:497KB
3-18-14
US10 - SUMP - ELEVATOR PIT OVERVIEW
US10
PDF:104KB
DWG:503KB
3-18-14
US11 - US INSIDE CORNER BOOT
US11
PDF:96KB
DWG:128KB
7-22-13
US12 - UNDERSLAB MEMBRANE SIDE LAP - SELVEDGE
US12
PDF:94KB
DWG:492KB
3-18-14
US13 - UNDERSLAB MEMBRANE CARTON FORM
US13
PDF:84KB
DWG:125KB
3-18-14
US14 - 650 OR PRM MEMBRANE TIE IN TO EMBEDDED
US14
PDF:116KB
DWG:498KB
3-18-14
 
US15 - UNDERSLAB MEMBRANE PIPE PENETRATION
US15
PDF:93KB
DWG:133KB
3-18-14
 
US16 - HORIZONTAL UNDERSLAB PITCH POCKET
US16
PDF:104KB
DWG:132KB
3-18-14
 
US17 - PREFORMED US OUTSIDE CORNER BOOT
US17
PDF:245KB
DWG:110KB
3-18-14
 
US18 - PRE APPLIED SEAL OF A VERTICAL LEG TURN
US18
PDF:85KB
DWG:125KB
3-18-14
 
US19 - UNDERSLAB REPAIR PATCH LESS THAN 2 INCH
US19
PDF:84KB
DWG:127KB
3-18-14
.
US20 - UNDERSLAB REPAIR PATCH MORE THAN 2 INCH
US20
PDF:92KB
DWG:127KB
3-18-14
.
US21 - UNDERSLAB PIT TOP CORNER BOOT
US21
PDF:213KB
DWG:113KB
3-18-14
.
BLINDSIDE WATERPROOFING DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
BS1 - BLINDSIDE DRAIN PIPE
BS1
PDF:25KB
DWG:132KB
3-08
BLINDSIDE DETAILS
BS2 - BLINDSIDE MEMBRANE SIDE LAPS/FACTORY SEAM
BS2
PDF:116KB
DWG:888KB
3-08
BS3 - BLINDSIDE / UNDERSLAB MEMBRANE KEY WAY DETAIL
BS3
PDF:39KB
DWG:260KB
3-08
BS4 - BLINDSIDE MEMBRANE WITH WATERTIGHT PIPE SEAL PENETRATION
BS4
PDF:24KB
DWG:119KB
3-08
BS5 - BLINDSIDE MEMBRANE NELSON STUD PLATE DETAIL
BS5
PDF:32KB
DWG:209KB
3-08
BS6 - BLINDSIDE PIPE PENETRATION THRU LAGGING
BS6
PDF:27KB
DWG:174KB
3-1-08
BS7 - BLINDSIDE PENETRATION WITH PIPE SEAL
BS7
PDF:28KB
DWG:177KB
3-1-08
BS8 - BLINDSIDE MEMBRANE - PIPE PENETRATION (TERMITE PROTECTION)
BS8
PDF:25KB
DWG:117KB
3-1-08
BS9 - BLINDSIDE MEMBRANE TIE IN TO HORIZONTAL WATERPROOFING (OPTION1)
BS9
PDF:77KB
DWG:670KB
3-1-08
BS10 - BLINDSIDE MEMBRANE TIE IN TO HORIZONTAL WATERPROOFING (OPTION 2)
 BS10
PDF:35KB
DWG:241KB
3-1-08
BS11 - BLINDSIDE WITH TOTAL FLOW - TIE IN TO UNDERSLAB
 BS11
PDF:26KB
DWG:133KB
3-1-08
BS12 - BLINDSIDE SOIL RETENTION BOLT COVER
BS12
PDF:33KB
DWG:213KB
3-1-08
BS13 - BLINDSIDE MEMBRANE TIE IN TO 650 / SPLIT SLAB
 BS13
PDF:36KB
DWG:243KB
3-1-08
BS14 - BLINDSIDE TIE IN TO 650
BS14
PDF:35KB
DWG:237KB
3-1-08
BS15 - BLINDSIDE TO 650 - SPLITSLAB OUTSIDE CORNER
BS15
PDF:26KB
DWG:115KB
3-1-08
BS16 - ATTACHED BLINDSIDE TIE IN TO 650
BS16
PDF:26KB
DWG:152KB
1-16-09
BS17 - SOLIDER PILE AT LAGGING
BS17
PDF: 68KB
DWG:439KB
7-12
 
BS18 - NELSON STUD WITHOUT SOIL NAIL
BS18
PDF:35KB
DWG:201KB
7-11
 
BS19 - REINFORCED LAP
BS19
PDF:105KB
DWG:793KB
7-11
 
BS20 - TIE BACK COVER
BS20
PDF:31KB
DWG:149KB
7-11
 
BS21 - BLINDSIDE REPAIR PATCH
BS21
PDF: 23KB
DWG:83KB
2-13
 
BS22 - BLINDSIDE MEMBRANE END LAP
BS22
PDF: 26KB
DWG:83KB
2-13
 
SPLIT SLAB WATERPROOFING DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
SS1 - SPLIT SLAB / 650 TIE IN WITH BLINDSIDE MEMBRANE
SS1
PDF:36KB
DWG:243KB
3-1-08
SPLIT SLAB
SS2 - PIPE PENETRATION
SS2
PDF:24KB
DWG:126KB
3-1-08
SS3 - EXPANSION JOINT COVER
SS3
PDF:28KB
DWG:169KB
3-1-08
SS4 - HORIZONTAL SLAB APPLICATION - GENERAL
SS4
PDF:26KB
DWG:116KB
3-1-08
SS5 - PLAZA DECK DUAL LEVEL DRAIN
SS5
PDF:30KB
DWG:191KB
3-1-08
SS6 - PEDESTAL / PAVER DETAIL
SS6
PDF:28KB
DWG:162KB
3-1-08
SS7 - SPLIT SLAB WITH CONCRETE TOPPING SYSTEM
SS7
PDF:29KB
DWG:188KB
3-1-08
PROTECTED WALL WATERPROOFING DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
PW1 - PROTECTED WALL - VERTICAL WALL APPLICATION
PW1
PDF:117KB
DWG:924KB
3-1-08
PROTECTED WALL
PW2 - REPAIR PATCH OVER PENETRATION
PW2
PDF:21KB
DWG:90KB
3-1-08
PW3 - TUNNEL DETAILING
PW3
PDF:36KB
DWG:241KB
3-1-08
PW4 - MEMBRANE @ FOOTER WITH TOTAL FLOW
PW4
PDF:35KB
DWG:239KB
3-1-08
PW5 - UNDERSLAB AND 650 MEMBRANE
PW5
PDF:33KB
DWG:204KB
3-1-08
PW6 - COVER FOR EXPANSION JOINT
PW6
PDF:24KB
DWG:113KB
3-1-08
650 WATERPROOFING DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
WP1 - REPAIR PATCH OVER 650 PENENTRATION
WP1
PDF:21KB
DWG:90KB
3-1-08
650 WATERPROOFING 
WP2 - 650 MEMBRANE PLANTER DETAIL
WP2
PDF:53KB
DWG:372KB
3-1-08
WP3 - WALL FLASHING AT BALCONY
WP3
PDF:23KB
DWG:110KB
12-19-12
WP4 - 650 MEMBRANE FLASHING WITH TILE @ BALCONY WALL
WP4
PDF:24KB
DWG:112KB
3-1-08
WP5 - 650 MEMBRANE VERTICAL WALL APPLICATION
WP5
PDF:117KB
DWG:924KB
3-1-08
WP6 - PIPE PENETRATION
WP6
PDF:23KB
DWG:125KB
3-1-08
WP7 - TUNNEL DETAILING
WP7
PDF:36KB
DWG:241KB
3-1-08
WP8 - EXPANSION JOINT COVER
WP8
PDF:28KB
DWG:169KB
3-1-08
WP9 - HORIZONTAL SLAB APPLICATION - GENERAL
WP9
PDF:26KB
DWG:116KB
3-1-08
WP10 - PLAZA DECK DUAL LEVEL DRAIN
WP10
PDF:30KB
DWG:191KB
3-1-08
WP11 - MEMBRANE @ FOOTER WITH TOTAL FLOW
WP11
PDF:35KB
DWG:240KB
3-1-08
WP12 - PEDESTAL / PAVER DETAIL
WP12
PDF:28KB
DWG:162KB
3-1-08
WP13 - UNDERSLAB AND 650 MEMBRANE
WP13
PDF:33KB
DWG:146KB
3-1-08
WP14 - 650 WITH CONCRETE TOPPING SYSTEM
WP14
PDF:29KB
DWG:188KB
3-1-08
WP15 - COVER FOR EXPANSION JOINT
WP15
PDF:24KB
DWG:113KB
3-1-08
WP16 - RAISED FLOOR HEIGHT
WP16
PDF:27KB
DWG:166KB
1-16-09
WP17 - 650 TO HOT APPLIED
WP17
PDF:26KB
DWG:167KB
7-11
WP18 - INSIDE CORNER
WP18
PDF:24KB
DWG:107KB
7-11
WP19 - OUTSIDE CORNER
WP19
PDF:26KB
DWG:97KB
7-11
WP20 - VERTICAL PIPE PENETRATION
WP20
PDF:26KB
DWG:165KB
3-12
 
WP21 - TERMINATION AT TOP OF WALL
WP21
PDF: 37KB
DWG:281KB
3-12
AIR BARRIER FLASHING DETAILS
AIR BARRIER SYSTEM (ABS)
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
ABS1.1 - CMU Backing Wall / Masonry Veneer Wall Base
ABS1.1
PDF:227KB
DWG:83KB
8-25-10
ABS
ABS1.2 - Framed Backing Wall / Masonry Veneer on Foundation Wall
ABS1.2
PDF:231KB
DWG:83KB
8-25-10
ABS1.3 - Framed Backing Wall / Masonry Vaneer on Foundation Slab
ABS1.3
PDF:237KB
DWG:99KB
8-25-10
ABS1.4 - Framed Backing Wall / Applied Finish on Foundation Wall
ABS1.4
PDF:222KB
DWG:81KB
8-25-10
ABS2.1 - CMU Backing Wall / Shelf Angle
ABS2.1
PDF:250KB
DWG:80KB
7-22-11
ABS2.2 - Framed Backing Wall / Shelf Angle
ABS2.2
PDF:247KB
DWG:79KB
7-22-11
ABS3.1.1-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 1 Sill
ABS3.1.1
PDF:250KB
DWG:KB
8-25-10
ABS3.1.2-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 1 Jamb
ABS3.1.2
PDF:215KB
DWG:KB
8-25-10
ABS3.1.3-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 1 Head
ABS3.1.3
PDF:259KB
DWG:KB
8-25-10
ABS3.2.1-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 2 Sill
ABS3.2.1
PDF:219KB
DWG:KB
8-25-10
ABS3.2.2-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 2 Jamb
ABS3.2.2
PDF:215KB
DWG:KB
8-25-10
ABS3.2.3-CMU Backing Wall/Non-Flanged Window/Door/Fixture Postion 2 Head
ABS3.2.3
PDF:260KB
DWG:KB
8-25-10
ABS3.3.1 - CMU Backing Wall / Flanged Window, Door, Fixture Sill
ABS3.3.1
PDF:251KB
DWG:KB
8-25-10
ABS3.3.2 - CMU Backing Wall / Flanged Window, Door, Fixture Jamb
ABS3.3.2
PDF:217KB
DWG:KB
8-25-10
ABS3.3.3 - CMU Backing Wall / Flanged Window, Door, Fixture Head
ABS3.3.3
PDF:257KB
DWG:KB
8-25-10
ABS4.1.1 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 1 Sill
ABS4.1.1
PDF:251KB
DWG:KB
8-25-10
ABS4.1.2 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 1 Jamb
ABS4.1.2
PDF:217KB
DWG:KB
8-25-10
ABS4.1.3 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 1 Head
ABS4.1.3
PDF:255KB
DWG:KB
8-25-10
ABS4.2.1 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 2 Sill
ABS4.2.1
PDF:219KB
DWG:KB
8-25-10
ABS4.2.2 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 2 Jamb
ABS4.2.2
PDF:215KB
DWG:KB
8-25-10
ABS4.2.3 - Framed Backing Wall / Non-Flanged Window, Door, or Fixture Position 2 Head
ABS4.2.3
PDF:255KB
DWG:KB
8-25-10
ABS4.3.1 - Framed Backing Wall / Flanged Window, Door, or Fixture Sill
ABS4.3.1
PDF:251KB
DWG:KB
8-25-10
ABS4.3.2 - Framed Backing Wall / Flanged Window, Door, or Fixture Jamb
ABS4.3.2
PDF:218KB
DWG:KB
8-25-10
ABS4.3.3 - Framed Backing Wall / Flanged Window, Door, or Fixture Head
ABS4.3.3
PDF:256KB
DWG:KB
8-25-10
ABS5.1 - CMU Backing Wall / Steel Column
ABS5.1
PDF:183KB
DWG:78KB
7-22-11
ABS5.2 - Framed Backing Wall / Concrete Column
ABS5.2
PDF:229KB
DWG:86KB
7-22-11
ABS6.1 - Venting the Top of a Wall Section at an Eave
ABS6.1
PDF:162KB
DWG:79KB
8-25-10
ABS6.2 - Venting the Top of a Wall Section at a Cantilever
ABS6.2
PDF:116KB
DWG:72KB
8-25-10
ABS6.3 - Venting the Top of a Wall Section Under a Sill
ABS6.3
PDF:118KB
DWG:81KB
8-25-10
AB31 - CMU Backing Wall/Masonry Veneer - Wall Base
AB31
PDF:193KB
DWG:121KB
2-4-14
AB32 - CMU Backing Wall/Masonry Veneer - Parapet
AB32
PDF:153KB
DWG:98KB
2-4-14
AB33 - CMU Backing Wall/Non-flanged Window, Door or Fixture Head
AB33
PDF:237KB
DWG:110KB
2-4-14
AB34 - CMU Backing Wall/Non-flanged Window, Door or Fixture Jamb
AB34
PDF:167KB
DWG:105KB
2-4-14
AB35 - CMU Backing Wall/Non-flanged Window, Door or Fixture Sill
AB35
PDF:174KB
DWG:117KB
2-4-14
AB36 - Framed Backing Wall/Masonry Veneer - Wall Base
AB36
PDF:205KB
DWG:141KB
2-4-14
AB37 - Framed Backing Wall/Masonry Veneer - Parapet
AB37
PDF:154KB
DWG:102KB
2-4-14
AB38 - Framed Backing Wall/Non-flanged Window, Door or Fixture Head
AB38
PDF:212KB
DWG:140KB
2-4-14
AB39 - Framed Backing Wall/Non-flanged Window, Door or Fixture Jamb
AB39
PDF:173KB
DWG:162KB
2-4-14
AB40 - Framed Backing Wall/Non-flanged Window, Door or Fixture Sill
AB40
PDF:174KB
DWG:127KB
2-4-14
AB41 - Framed Backing Wall/Masonry Veneer - Wall Base
AB41
PDF:204KB
DWG:137KB
2-4-14
AB42 - Framed Backing Wall/Masonry Veneer - Parapet
AB42
PDF:155KB
DWG:97KB
2-4-14
AB43 - Framed Backing Wall/Non-flanged Window, Door or Fixture Head
AB43
PDF:229KB
DWG:127KB
2-4-14
AB44 - Framed Backing Wall/Non-flanged Window, Door or Fixture Jamb
AB44
PDF:169KB
DWG:100KB
2-4-14
AB45 - Framed Backing Wall/Non-flanged Window, Door or Fixture Sill
AB45
PDF:175KB
DWG:132KB
2-4-14
THRU WALL FLASHING DETAILS (TWF)
THRU WALL FLASHING (TWF)
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
TWF1.1 - TWF Veneer Ledges
TWF1.1
PDF:300KB
DWG:330KB
 8-25-10
TWF
TWF1.2 - TWF Veneer Risers
TWF1.2
PDF:331KB
DWG:314KB
 8-25-10
TWF2 - TWF Veneer at a Wall to Slab Interface
TWF2
PDF:291KB
DWG:271KB
 8-25-10
TWF3 - TWF Veneer Sills at Non-Flanged Windows, Doors, and Fixtures
TWF3
PDF:264KB
DWG:278KB
7-22-11
TWF4 - TWF Veneer Sills at Flanged Windows, Doors, and Fixtures
TWF4
PDF:295KB
DWG:287KB
 8-25-10
TWF5 - TWF Single Wythe Sills at Non-Flanged Windows, Doors, and Fixtures
TWF5
PDF:266KB
DWG:269KB
 7-22-11
TWF6 - TWF Veneer Above Lintels
TWF6
PDF:284KB
DWG:288KB
 8-25-10
TWF7 - TWF Veneer Heads at Non-Flanged Windows, Doors, and Fixtures
TWF7
PDF:373KB
DWG:309KB
 8-25-10
TWF8 - TWF Veneer Along Shelf Angles
TWF8
PDF:358KB
DWG:300KB
7-22-11
TWF9 - TWF Single Wythe Heads at Non-Flanged Windows, Doors, and Fixtures
TWF9
PDF:224KB
DWG:270KB
 8-25-10
TWF10
TWF10
PDF:KB
DWG:534KB
 8-25-10
TWF10.1 - TWF Veneers at Wall to Roof Intersection (1 of 5 Figures)
TWF10.1
PDF:294KB
DWG:KB
 8-25-10
TWF10.2 - TWF Veneers at Wall to Roof Intersection (2 of 5 Figures)
TWF10.2
PDF:335KB
DWG:KB
 8-25-10
TWF10.3 - TWF Veneers at Wall to Roof Intersection (3 of 5 Figures)
TWF10.3
PDF:363KB
DWG:KB
 8-25-10
TWF10.4 - TWF Veneers at Wall to Roof Intersection (4 of 5 Figures)
TWF10.4
PDF:258KB
DWG:KB
 8-25-10
TWF10.5 - TWF Veneers at Wall to Roof Intersection (5 of 5 Figures)
TWF10.5
PDF:231KB
DWG:KB
 8-25-10
TWF11 - TWF Parapet Wall at Roof Intersection
TWF11
PDF:318KB
DWG:272KB
 8-25-10
TWF12 - TWF Veneer at Deck Framing
TWF12
PDF:303KB
DWG:277KB
 8-25-10
TWF13 - TWF Masonry Chimney Cap
TWF13
PDF:244KB
DWG:325KB
 8-25-10
TWF14 - TWF Applied Exterior Finish at Flush Foundation to Upper Wall Joints
TWF14
PDF:251KB
DWG:283KB
 8-25-10
TWF15 - TWF Applied Exterior Finish at a Slab Interface
TWF15
PDF:285KB
DWG:265KB
 8-25-10
TWF16 - TWF Applied Exterior Finish for Sills or Thresholds at Non-Flanged Windows, Doors, or Fixtures
TWF16
PDF:290KB
DWG:276KB
7-22-11
TWF17 - TWF Applied Exterior Finish for Sills or Thresholds at Flanged Windows, Doors, or Fixtures
TWF17
PDF:302KB
DWG:276KB
 8-25-10
TWF18 - TWF Applied Exterior Finish Heads at Non-Flanged Windows, Doors or Fixtures
TWF18
PDF:305KB
DWG:271KB
 8-25-10
TWF19
TWF19
PDF:296KB
DWG:268KB
 8-25-10
TWF20
TWF20
PDF:KB
DWG:317KB
 8-25-10
TWF20.1 - TWF Applied Exterior Finish at Wall to Roof Intersection (1 of 3 Figures)
TWF20.1
PDF:218KB
DWG:KB
 8-25-10
TWF20.2 - TWF Applied Exterior Finish at Wall to Roof Intersection (2 of 3 Figures)
TWF20.2
PDF:297KB
DWG:KB
 8-25-10
TWF20.3 - TWF Applied Exterior Finish at Wall to Roof Intersection (3 of 3 Figures)
TWF20.3
PDF:262KB
DWG:KB
 8-25-10
TWF21 - TWF Applied Exterior Finish Heads at Wall to Deck Framing
TWF21
PDF:323KB
DWG:276KB
 8-25-10
WINDOWS DOORS & FIXTURE FLASHING DETAILS (WDF)
WINDOWS DOORS & FIXTURES (WDF)
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
WDF22.1 - Strip Flashing a Rough Opening to Recieve a Non-Flanged Window, Door, or Fixture (Option 1 of 3)
WDF22.1
PDF:269KB
DWG:255KB
7-22-11
WDF
WDF22.2 - Pan Flashing a Rough Opening Sill / Threshold and Strip Flashing the Jambs and Head to Recieve a Non-Flanged Window, Door, or Fixture (Option 2 of 3)
WDF22.2
PDF:301KB
DWG:256KB
7-22-11
WDF22.3 - Pan Flashing a Rough Opening to Recieve a Non-Flanged Window, Door, or Fixture (Option 3 of 3)
WDF22.3
PDF:331KB
DWG:257KB
8-25-10
WDF22.4 - Flashing the Head of an Arched Rough Opening to Recieve a Non-Flanged Window, Door, or Fixture
WDF22.4
PDF:256KB
DWG:257KB
8-25-10
WDF22.5 - Flashing a Circular Rough Opening to Recieve a Non-Flanged Window, Door, or Fixture
WDF22.5
PDF:351KB
DWG:274KB
8-25-10
WDF23.1 - Strip Flashing a Flanged Window, Door, or Fixture
WDF23.1
PDF:237KB
DWG:256KB
7-22-11
WDF23.2 - Pan Flashing a Flanged Window, Door, or Fixture Sill / Threshold and Strip Flashing the Jambs and Head
WDF23.2
PDF:270KB
DWG:257KB
7-22-11
WDF23.3 - Flashing the Head of an Arched Flanged Window, Door or Fixture
WDF23.3
PDF:251KB
DWG:258KB
8-25-10
WDF23.4 - Flashing a Circular Flanged Window, Door, or Fixture
WDF23.4
PDF:293KB
DWG:276KB
8-25-10
WDF24 - Flashing Single Wythe Masonry to Recieve a Non-Flanged Window, Door, or Fixture
WDF24
PDF:302KB
DWG:319KB
7-22-11
WDF25 - Flashing an HVAC Wall Sleeve Opening
WDF25
PDF:388KB
DWG:258KB
7-22-11
WDF26.1
WDF26.1
PDF:KB
DWG:109KB
8-25-10
WDF26.1.1
WDF26.1.1
PDF:KB
DWG:KB
8-25-10
WDF26.1.2 - Flashing a Masonry Cavity Wall Rough Opening to Receive a Non-Flanged Replacement Window (2 of 3)
WDF26.1.2
PDF:253KB
DWG:KB
8-25-10
WDF26.1.3 - Flashing a Masonry Cavity Wall Rough Opening to Receive a Non-Flanged Replacement Window (3 of 3)
WDF26.1.3
PDF:277KB
DWG:KB
8-25-10
TILEGUARD DETAILS
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
TG1 - TILEGUARD ANTIFRACTURE NON-WATERPROOF DETAIL
TG1
PDF:37KB
DWG:214KB
1-2-14
TILEGUARD DETAILS
TG2 - 300 & TILEGUARD WATERPROOFING DETAIL
TG2
PDF:36KB
DWG:210KB
3-1-08
TG3 - TILEGUARD - 300 MEMBRANE FLOOR DRAIN DETAIL
TG3
PDF:71KB
DWG:595KB
3-1-08
TG4 - 300 MEMBRANE FLOOR PENETRATION DETAIL
TG4
PDF:45KB
DWG:313KB
3-1-08
INSULATED CONCRETE FORMS DETAIL
DESCRIPTION
ROLLOVER
TO PREVIEW
PDF Icon PDF
FORMAT
DWG Icon DWG
FORMAT
REVISION
DATE
PREVIEW IMAGES IN WINDOW BELOW
ICF1 - INSULATED CONCRETE FORMS APPLICATION
ICF1
PDF:117KB
DWG:924KB
5-8-08
ICF DETAIL DEFAULT
Products | Shows & Events | Brownfield Development | Green Initiative | Warranty | Contact Us


Polyguard Logo

Home / Architectural / Highway / Pipeline / Mechanical / Residential /
Underseal /ISO 9001 / MSDS's / History / Site Map / Careers | Contact Us

© 2014 Polyguard Products, Inc. All Rights Reserved.

ISO Logo
Polyguard is ISO 9001 certified since 1996.